1. Adopt mature PLC control system technology, make the whole machine stable and high-speed
2. Can be suitable for square /round/oval flat bottles at the same time
3. Use touch screen control system, make operation simple, practical and efficient
4. Upgraded butterfly labeling station design, can be applied for conical bottle labeling
5. Screw adjust the suppression mechanism, high accuracy
6. Synchronization chain mechanism, to ensure smooth and precise calibration
7. Transparent sticker labeling without foam, adhesive sticker labeling without wrinkle
8. Widely used and mutil-function with high flexibility
9. Date/code printer is for optional
10. Transparent label sensor is for optional
11. Can be customized according to your requirement
Label width: 20-160mm
Max Outside diameter of label roll: φ280mm
Inside diameter of label roll: φ76mm
Max Labeling speed: 120pcs /min
Accuracy of labeling:±1mm
Power: 220V/110V 50/60Hz 1200W
Machine Net Weihgt : 350KG
Machine Dimension: 3050mm x 1500mm x 1600 mm
1. Fix the label roll on the machine according to the graphical representation, adjust the height of each part.
2. Check if all the positions of the labels are correct.
3. Adjust the distance between the two rails, the distance between the brush and the conveyer, make sure the distance is suitable for the product to pass.
4. Turn on the power switch, turn on the optoelectronic switch.
5. Turn on the switch of the motor and label sending device, debug labeling, if there are any abnormal, get rid of them.
6. Adjust the labeling position.
7. Ensure the test is OK, then operating the machine normally.
8. Power off.